How to Use a Lägler TRIO

Those who don’t know call the Lägler TRIO a buffer. Only those who don’t know.

The way to feel what’s what is to get your hands on the TRIO and do some work – and to make sure you’re using it the right way.

That comes with getting some practice laps at the source: Lägler’s Premium Sanding Technology (PST^®) certification training.

Next best? Read what’s below. It’s based on Lägler’s “Sanding of Wooden Floors” manual (download free PDF).

How Best to Use the Lägler TRIO

The TRIO is designed with two functional advantages:

• Produce a flatter surface than a belt sander when using the same grit abrasives
• Sand in any direction, from wall to wall

Fine sanding using the TRIO generally begins with hook-and-loop sanding discs starting at 60 grit. You can sand with the TRIO up to 150 grit, depending
on the wood species and the subsequent surface treatment.

If you want to take it one step further, use sanding screens after the final sanding step. Use screens at the same grit as the sanding disc used in the
final sanding step.

One difference between the TRIO, the industry’s original multidisc sander, and a buffer is it packs the power for pre-sanding, too. You can use 40 grit
to smooth out minor over- and under-wood.

Fine Sanding with the Lägler TRIO

To create high-quality surfaces when using the TRIO for fine sanding:

• Do not skip more than one grit number when pre-sanding with a belt sander
• Do not skip any grit numbers when fine sanding with the TRIO

If you want less aggressive cutting with the TRIO:

• Remove the additional weight
• Attach two flexible Velcro rings to each sanding plate

These methods especially give you an advantage when sanding uneven engineered flooring, helping to prevent the top layer from being sanded through.

To increase sanding abrasion with the TRIO:

• Remove the Velcro rings from the TRIO sanding plates
• Decrease walking speed while sanding

Warning: Excessively slow walking speeds or continuous sanding in the same spot creates too much heat. That can cause burn marks on the wood flooring and
clogging of the abrasive. If a spot requires extra sanding, make sure to repeat sanding at appropriate time intervals.

The wood species and the surface treatment to be carried out after the fine sanding determines the grit number of the final sanding step.

Intermediate Finish Sanding with the Lägler TRIO

The TRIO can be used for intermediate finish sanding with sanding screens.

The application of a used sanding screen and the removal of the additional weight is recommended to reduce the risk of sanding through the finish layer
during intermediate finish sanding.

Sanding pads also can be used on the TRIO for the intermediate finish layer.

When sanding cork:

• Never sand with abrasives coarser than 60 grit
• Always remove the additional weight from the TRIO
• Sand without the flexible Velcro ring on the sanding plates

Check surface quality and perform additional sanding steps depending on the result.

Last note: Clean the filter cartridge regularly.

Adding the TRIO to your roster of equipment is a next-level play. It’s for craftsmen who raise the bar for quality and give themselves the opportunity
to command a next-level place in their market.

We know it takes real commitment to the investment. We welcome you and your crew to join us for a one-day Lägler PST training class. Test drive the TRIO
and get started the right way.

Related Blog Posts

How to Minimize Sanding Efforts + Maximize Business Profits

Big Machine Sanding Direction, Speed + Pressure

Abrasives: Cost vs Value of Quality